Removing coatings from floor bricks, flagstones, quarry tiles etc
Which Product?
- Cardinal Red: Solvistrip
- Oil-based Paint: Kling Strip or Stripper 4-F
- Floor Sealer: Solvistrip
- Carpet Adhesive: Adhesive Remover 510
Tip
When using Adhesive Remover 510 or Solvistrip on floors, pour the product over a small area, let it find its own level and leave it to work. When it has done so, use a bit of cardboard to squeegee the product to the next area – only a little of it has been in contact with the floor, the bulk of it was simply preventing drying out, so most of it is still reactive. Then immediately clean up the dissolved coatings with hot soapy water, a scrubbing brush and sponge. This washing element of the process is quicker with a hot water pressure-washer, where it is possible to use one. Where it is not, our Vacwash attachment can often make it possible.
